Yayıncı "Springer" Metalurji ve Malzeme Mühendisliği Bölümü Koleksiyonu için listeleme
Toplam kayıt 6, listelenen: 1-6
-
Deformation Capacity of a Ternary Magnesium Alloy in a Gas-Forming Process at Elevated Temperatures
(Springer, 2019)An experimental ternary magnesium alloy, Mg-2Zn-2Ce, has been investigated. The attention was focused on the possibility of using this alloy for an unconventional sheet-forming process based on a flexible medium (gas-forming) ... -
Evolution of Microstructure and Texture in AZ31 Alloy Subjected to Gas Forming
(Springer, 2017)In this study, AZ31 sheets were subjected to gas forming using a stepped geometry die and employing two different temperatures (400A degrees C and 450A degrees C) and exposure times (60 s and 120 s). Microstructural ... -
Flame retardant effect of aluminum hypophosphite in heteroatom-containing polymers
(Springer, 2020)In the present study, the effect of the aluminum hypophosphite (AlHP) concentration on the flame retardant properties of the four different polymers [polyamide 6 (PA6), poly(lactic acid) PLA, thermoplastic polyurethane ... -
Investigation into Ca-Doped LaMnCoO3 Perovskite Oxides for Thermochemical Water Splitting
(Springer, 2022)Two-step thermochemical water splitting (II-TWS), involving concentrating sunlight, has become prominent for green hydrogen production that does not require H2/O2 separation steps at high temperatures. The kinetics and ... -
Processing optimization of SiO2-capped aluminum-doped ZnO thin films for transparent heater and near-infrared reflecting applications
(Springer, 2021)In this study, a series of optimization steps were performed in the production of Al-doped ZnO (AZO) thin films to tailor their properties as efficient transparent heaters and for near-infrared (NIR) reflectance. The films ... -
Production and Characterization of Sputtered Y-doped BaZrO3 for Proton Conducting Oxides
(Springer, 2022)A comprehensive study was carried out to evaluate single-phase BaZr0.80Y0.20O3-delta thin films produced by RF magnetron sputtering using a single target material. The present study mainly involved three objectives, i.e., ...