Basit öğe kaydını göster

dc.contributor.authorYeniocak, M.
dc.contributor.authorGöktaş, O.
dc.contributor.authorErdil, Y.Z.
dc.contributor.authorÖzen, E.
dc.contributor.authorAlma, M.H.
dc.date.accessioned2020-11-20T16:49:06Z
dc.date.available2020-11-20T16:49:06Z
dc.date.issued2014
dc.identifier.issn1336-4561
dc.identifier.urihttps://hdl.handle.net/20.500.12809/6102
dc.description.abstractThe aim of this study was to investigate the suitability of vine pruning {Vitis vinifera L. cv. Sultani) in Turkey as an alternative raw material for particleboard production. In Turkey, there are 484.000 hectare areas for vine cultivation. Annually, approximately 2.420.000 ton vine pruning parts residues remained. Every season, large quantities of vine prunings remain as by-products in the field, and unfortunately not utilized properly in related industries. In this study, vine pruning and wood (Scots pine) particles in various proportions were used as the raw material for three-layer flat pressed particleboards. A commercial urea-formaldehyde (UF) resin was used as binder. Small size experimental panels (56 × 56 × 2 cm) were manufactured. Some physical ((thickness swelling (TS), water absorption (WA)) and mechanical ((modulus of rupture (MOR), modulus of elasticity (MOE), internal bond (IB) perpendicular screw-holding (PSH, x) and lateral screw-holding strengths (SHS, //)) properties of panels were determined. Results indicated that the bending strengths of A, B, C and D panels met the minimum bending strengths value (11.5 N. mm-2) required in TS-EN 312-2 (1999) standard for general purpose particleboards.en_US
dc.item-language.isoengen_US
dc.publisherStatny Drevarsky Vyskumny Ustaven_US
dc.item-rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectAgricultural residueen_US
dc.subjectParticleboarden_US
dc.subjectVine pruning partsen_US
dc.titleInvestigating the use of vine pruning stalks (Vitis vinifera L. CV sultani) as raw material for particleboard manufacturingen_US
dc.item-typearticleen_US
dc.contributor.departmenten_US
dc.contributor.departmentTempYeniocak, M., Muğla Sltki Koçman University, Faculty of Technology, Department of Woodworking Industrial Engineering, Muğla 48000, Turkey; Göktaş, O., Muğla Sltki Koçman University, Faculty of Technology, Department of Woodworking Industrial Engineering, Muğla 48000, Turkey; Erdil, Y.Z., Muğla Sltki Koçman University, Faculty of Technology, Department of Woodworking Industrial Engineering, Muğla 48000, Turkey; Özen, E., Muğla Sltki Koçman University, Faculty of Technology, Department of Woodworking Industrial Engineering, Muğla 48000, Turkey; Alma, M.H., Kahramanmaraş Sütçü Imam University, Faculty of Forestry, Department of Industrial Engineering of Forestry, Kahramanmaraş, Turkeyen_US
dc.identifier.volume59en_US
dc.identifier.issue1en_US
dc.identifier.startpage167en_US
dc.identifier.endpage176en_US
dc.relation.journalWood Researchen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US


Bu öğenin dosyaları:

DosyalarBoyutBiçimGöster

Bu öğe ile ilişkili dosya yok.

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster