Yayın tarihi için Ağaç İşleri Endüstri Mühendisliği Bölümü Koleksiyonu listeleme
Toplam kayıt 109, listelenen: 41-60
-
Estimation equations for moment resistances of L-type screw corner joints in case goods furniture
(Forest Products Soc, 2008)The effects of the number of screws and screw sizes on bending moment resistance of L-type furniture corner joints constructed of particleboard (PB) and medium density fiberboard (MDF) with resin Surfacing were investigated ... -
Determination of the color stability of an environmetally-frienlywood stain from saffron (CROCUS SATIVUS L.) extrakts under uv exposure
(Slovak Forest Products Research Inst, 2009)This study was designed to develop an environmentally friendly wood stain by natural pigments from saffron (Crocus sativus L.) and determine the color stability of this stain to UV light irradiation. Wood stains derived ... -
Masif ve Lamine ağaç malzemelerin (LAM) Alyan Vida tutma mukavemeti
(2009)Bu çalışmada, farklı ağaç türlerinden hazırlanan, polivinilasetat (PVAc) ve üre-formaldehit (ÜF) tutkallarıyla yapıştırılmış lamine malzemelerin (LVL), liflere dik ve paralel doğrultudaki alyan vida tutma performansları, ... -
Surface characteristics of wood pre-impregnated with borates before varnish coating
(Forest Products Soc, 2009)Some surface characteristics of Calabrian pine (Pinus brutia Ten) pre-impregnated with borates before varnish coating were studied. Boric acid, borax, and sodium perborate were used as borates. An alkyd-based synthetic ... -
Design and construction of school work tables for developing countries
(Forest Products Soc, 2009)Cyclic tests were conducted to determine the strength and durability of two types of school work tables designed for use in developing countries which were constructed with round mortise and tenon joints. The frames were ... -
Comparison of mechanical properties of solid wood and laminated veneer lumber fabricated from Turkish beech, Scotch pine, and Lombardy poplar
(Forest Products Soc, 2009)Selected mechanical properties of laminated veneer lumber (LVL) prepared from Turkish beech (Fagus orientalis L.), Scotch pine (Pinus sylvestris L.), and Lombardy poplar (Populus nigra) veneers bonded with polyvinyl acetate ... -
Some combustion parameters of wood impregnated with borates
(Forest Products Soc, 2009)This study was conducted to determine some of the combustion parameters of Calabrian pine and Oriental beech treated with borates. Average mass loss and temperature values of Calabrian pine and Oriental beech wood were ... -
Effects of the Traditional Turkish Art of Marbling (Ebru) Techniques on the Adhesion, Hardness, and Gloss of Some Finishing Varnishes
(Forest Products Soc, 2010)The aim of this study was to determine the effects of ebru, a traditional Turkish art of marbling, on some physical properties of various varnishes. Scots pine (Pinus sylvestris L.), Turkish oriental beech (Fagus orientalis ... -
Ultimate Failure Load and Stiffness of Screw Jointed Furniture Cabinets Constructed of Particleboard and Medium-Density Fiberboard
(Forest Products Soc, 2011)The objective of this study was to investigate the effects of material type, screw diameter, and screw length on ultimate failure load and stiffness of four-sided furniture cabinets. In total, 81 four-sided test cabinets ... -
Natural Fiber Blend-Nylon 6 Composites
(Wiley-Blackwell, 2013)In this study, engineering thermoplastic composites were prepared from natural fiber blendfilled nylon 6. Natural fiber blend from a mixture of kenaf, flax, and hemp fibers were added to nylon 6 using melt mixing to produce ... -
Some mechanical properties of wood impregnated with environmentally- friendly boron and copper based chemicals
(Slovak Forest Products Research Inst, 2013)The aim of this study was made to determine some mechanical properties such as compression strength parallel to grain (CSPG), modulus of rupture (MOR), and modulus of elasticity (MOE) of wood treated with some boron and ... -
Surface properties of impregnated and varnished Scots pine wood after accelerated weathering
(Wiley, 2014)In this study, the effect of accelerated weathering on the surface properties of Scots pine specimens impregnated with wolmanit-CB, tanalith-E, and adolit-KD5 and coated with synthetic and polyurethane varnishes was ... -
SOME PHYSICAL CHARACTERISTICS OF THERMALLY MODIFIED ORIENTAL-BEECH WOOD
(Univ Bio-Bio, 2014)Heat treatment of Oriental-beech (Fagus orientalis) wood was carried out by hot air in an oven for 2, 4, and 8 h at 140, 170, and 200 degrees C. After heat treatment, some physical characteristics such as surface roughness, ... -
RESEARCH ON THE USAGE OF ANTIFUNGAL AND ANTIBACTERIAL PROPERTIES OF INDIGO (INDIGOFERA TINCTORIA L.) COLORANT USED AS A WOOD PRESERVATIVE
(Slovak Forest Products Research Inst, 2015)In this study the antifungal and antimicrobial property of plant extracts from indigo was determined when used as a wood preservative. The extract was dissolved from Indigofera tinctoria L. by using an ultrasound assisted ... -
Bending Moment Capacities of L-Shaped Mortise and Tenon Joints under Compression and Tension Loadings
(North Carolina State Univ Dept Wood & Paper Sci, 2015)Tests were carried out to determine the bending moment capacities of L-shaped mortise and tenon furniture joints under both compression and tension loadings. The effects of wood species (Turkish beech and Scotch pine), ... -
SOME PROPERTIES OF TURKISH SWEETGUM BALSAM (STYRAX LIQUIDUS) IMPREGNATED ORIENTAL BEECH WOOD PART I: PHYSICAL PROPERTIES
(Slovak Forest Products Research Inst, 2015)The purpose of this study was to investigate some physical properties such as water absorption (WA), color, gloss, and surface hardness changes of Oriental beech (Fagus orientalis L.) wood impregnated with Turlcish sweetgum ... -
DECAY RESISTANCE, PHYSICAL, MECHANICAL, AND THERMAL PROPERTIES OF HEATED ORIENTAL BEECH WOOD
(Slovak Forest Products Research Inst, 2015)Heat treatment of Oriental beech (Fagus orientalis) wood was carried out by hot air in an oven for 2, 6, and 10 h at 125, 155, and 185 degrees C. After heat treatment; decay resistance, oven dry density, modulus of rupture ... -
Some Physical and Mechanical Properties of Borate-Treated Oriental Beech Wood
(Zagreb Univ, Fac Forestry, 2015)This study was designed to determine some physical properties such as surface roughness and oven dry density, and some mechanical properties such as modulus of elasticity (MOE) of borate-treated wood specimens. Wood specimens ... -
QUALIFICATIONS SOUGHT IN TECHNICAL EMPLOYEES BY SME BUSINESSES (FURNITURE INDUSTRY SAMPLE)
(Pressacademia, 2016)Nowadays, businesses are increasingly in need of employees who can adopt changing conditions in order to be able to enhance competitive capacity, who can understand technological applications and can use the same, who are ... -
Potential of ultrasonic pulse velocity for evaluating the dimensional stability of oak and chestnut wood
(Elsevier, 2016)The objective of this study was to examine the potential of ultrasonic velocity as a rapid and nondestructive method to predict the dimensional stability of oak (Quercus petraea (Mattuschka) Lieblein) and chestnut (Castanea ...