Yayıncı "North Carolina State Univ Dept Wood & Paper Sci" için listeleme
Toplam kayıt 20, listelenen: 1-20
-
ADSORPTION CHARACTERIZATION OF Co(II) IONS ONTO CHEMICALLY TREATED QUERCUS COCCIFERA SHELL: EQUILIBRIUM, KINETIC, AND THERMODYNAMIC STUDIES
(North Carolina State Univ Dept Wood & Paper Sci, 2011)Quercus coccifera shell (QCS), a relatively abundant and inexpensive material, is currently being investigated as an adsorbent to remove cobalt(II) from water. Before the adsorption experiments, QCS was subjected to chemical ... -
Antimicrobial and Antifungal Properties of Madder Root (Rubia tinctorum) Colorant Used as an Environmentally-Friendly Wood Preservative
(North Carolina State Univ Dept Wood & Paper Sci, 2014)The aim of this study was to determine the antifungal and antimicrobial properties of madder root extract when used as an environmentally-friendly wood preservative and against blue stain. Plant dyestuff was extracted from ... -
Bending Moment Capacities of L-Shaped Mortise and Tenon Joints under Compression and Tension Loadings
(North Carolina State Univ Dept Wood & Paper Sci, 2015)Tests were carried out to determine the bending moment capacities of L-shaped mortise and tenon furniture joints under both compression and tension loadings. The effects of wood species (Turkish beech and Scotch pine), ... -
Characterization of Wheat Hull and Wheat Hull Ash as a Potential Source of SiO2
(North Carolina State Univ Dept Wood & Paper Sci, 2013)Wheat is a very important agricultural product, and is among the grains that has the highest sustenance value in the world. Every year large amounts of wheat hull is produced which has a low economic value. The present ... -
Chemical Analysis of Tree Barks using ATR-FTIR Spectroscopy and Conventional Techniques
(North Carolina State Univ Dept Wood & Paper Sci, 2017)ATR-FTIR spectroscopy and conventional analysis techniques were performed to characterize the chemical structure of different coniferous (cedar, fir, Calabrian pine, and spruce) and deciduous (chestnut, oak, alder, and ... -
Colorability of Wood Material with Punica granatum and Morus nigra Extracts
(North Carolina State Univ Dept Wood & Paper Sci, 2014)The aim of this study was the development of an eco-friendly dye that may be used in furniture, woodworking, and upper surface treatment, with no ill effects to human health. The plant dyestuff was extracted from pomegranate ... -
Effect of Tenon Size on Static Front to Back Loading Performance of Wooden Chairs in Comparison with Acceptable Design Loads
(North Carolina State Univ Dept Wood & Paper Sci, 2018)The effects of tenon size were investigated relative to the front to back loading performance of Scots pine (Pinus sylvestris L.) chairs. Forty-five chair frames were constructed with mortise and tenon joints with 9 tenon ... -
Effect of the Panel Type and Panel Thickness on Moment Resistance of Screw-Jointed Corner Joints and Stiffness of Four-Member Cabinets
(North Carolina State Univ Dept Wood & Paper Sci, 2014)The objective of this study was to investigate the effects of panel type and panel thickness on moment resistance of L-type corner joints and deflection characteristics of four-member cabinets. Three different wood based ... -
Effects of Cross-sectional Geometry and Force Direction on Bending Strength and Modulus of Elasticity of Some Softwood Beams
(North Carolina State Univ Dept Wood & Paper Sci, 2019)The effects of cross-sectional geometry and force direction on bending strength (MOR) and modulus of elasticity (MOE) were investigated in selected softwoods. The specimens were constructed of Scots pine (Pinus sylvestris), ... -
Effects of Wood Species, Number of Teeth, and Adhesive Type on Moment Capacities of Box-Joints
(North Carolina State Univ Dept Wood & Paper Sci, 2020)Effects of the wood species, number of teeth, and adhesive type were studied relative to the moment capacities of box joints under tension and compression loadings, which is commonly used in case type solid wood furniture. ... -
Manufacturing Biocomposites Using Black Pine Bark and Oak Bark
(North Carolina State Univ Dept Wood & Paper Sci, 2018)Bark as a biowaste has a huge availability throughout the world and has had limited use in industrial applications. Black pine bark and oak bark were considered in this work. The aim was to manufacture a new biocomposite ... -
Mechanical Properties of Externally Invisible Furniture Joints Made of Wood-Based Composites
(North Carolina State Univ Dept Wood & Paper Sci, 2016)The aim of this investigation was to design and determine the mechanical properties of innovative, externally invisible, 3D-printed cabinet furniture joints that can be assembled without the use of tools. The cognitive ... -
Mechanical Properties of Impregnated and Heat Treated Oriental Beech Wood
(North Carolina State Univ Dept Wood & Paper Sci, 2016)The main purpose of this study was to investigate mechanical properties such as the modulus of rupture (MOR) and compression strength parallel to grain (CSPG) of impregnated and heat-treated Oriental beech (Fagus orientalis ... -
Numerical Analyses of Various Sizes of Mortise and Tenon Furniture Joints
(North Carolina State Univ Dept Wood & Paper Sci, 2016)This study reports the moment resistance, stiffness, and numerical analysis of various sizes of round-end mortise and tenon joints. L-shaped and T-shaped specimens were constructed. Joints were manufactured using three ... -
Screw Withdrawal Resistance and Surface Roughness of Woven Carbon and Glass Fiber-reinforced Wood-plastic Composites
(North Carolina State Univ Dept Wood & Paper Sci, 2020)Wood-plastic composites (WPCs) have become one of the most remarkable materials for construction in recent years. Along with high resistance against biological threats, the high mechanical properties are also desired from ... -
Static Front to Back Loading Capacity of Wood Chairs and Relationship between Chair Strength and Individual Joint Strength
(North Carolina State Univ Dept Wood & Paper Sci, 2016)The relationship between the static front to back loading capacity of chairs and the moment capacities of the joints used in their side frames was investigated. The secondary purpose of the study was to determine the effect ... -
SYNTHESIS OF MAGNESIUM SILICATE FROM WHEAT HUSK ASH: EFFECTS OF PARAMETERS ON STRUCTURAL AND SURFACE PROPERTIES
(North Carolina State Univ Dept Wood & Paper Sci, 2012)In the present study, magnesium silicate was produced by using wheat husk ash. Wheat husk was burned at 600 degrees C to obtain an amorphous ash structure, and the ash was processed with sodium hydroxide solution with heat ... -
Thermal Analysis of Polyamide 6 Composites Filled by Natural Fiber Blend
(North Carolina State Univ Dept Wood & Paper Sci, 2016)This study describes changes in the viscoelastic and thermal properties of composites made with various percentages (up to 20 wt.%) of a natural fiber blend (a mixture of flax, kenaf, and hemp fibers) and polyamide 6 (PA ... -
Utilizing Poppy Husk-based Particleboards as an Alternative Material in Case Furniture Construction
(North Carolina State Univ Dept Wood & Paper Sci, 2017)Particleboard can be defined as a wood-based panel produced under pressure and heat with the inclusion of wood particles or other lignocellulosic materials and an adhesive. The need for alternative resources to replace ... -
Withdrawal Force Capacity of T-Type Furniture Joints Constructed from Various Heat-treated Wood Species
(North Carolina State Univ Dept Wood & Paper Sci, 2017)The withdrawal force capacities were compared for T-type furniture joints made from heat-treated Siberian pine (Pinus sibirica), iroko (Chlorophora excelsa), and common ash (Fraxinus excelsior), which are commonly used in ...