Basit öğe kaydını göster

dc.contributor.authorTuzun, O.
dc.contributor.authorOktik, S.
dc.contributor.authorAltindal, S.
dc.contributor.authorMammadov, T. S.
dc.date.accessioned2020-11-20T16:38:23Z
dc.date.available2020-11-20T16:38:23Z
dc.date.issued2006
dc.identifier.issn0040-6090
dc.identifier.urihttps://doi.org/10.1016/j.tsf.2005.12.104
dc.identifier.urihttps://hdl.handle.net/20.500.12809/5182
dc.descriptionSymposium on Thin Film and Nanostructured Materials for Photovoltaics held at the 2005 EMRS Meeting - MAY 31-JUN 03, 2005 - Strasbourg, FRANCEen_US
dc.descriptionTUZUN OZMEN, Ozge/0000-0002-5204-3737en_US
dc.descriptionWOS: 000238249000052en_US
dc.description.abstractA new approach for hybrid metal-insulator-semiconductor Si solar cells is adopted by the Institute of Fundamental Problems for High Technology, Ukrainian Academy of Sciences. in this technique, the porous silicon layers are created on both sides of single crystal wafers by chemical etching before an improved MIS cell preparation process. Using this technique, the solar cells with efficiencies above 15% have been obtained under AM1.5 condition (under 100 mW/cm(2) illumination at 25 degrees C). In this work the dark current-voltage-temperature(I-V-T) characteristics of these cells are studied over a temperature range between 79 and 400 K. The dark capacitance-voltage (C-V) and conductance-voltage (G-V) behaviours of these cells at 100 kHz are analysed for the same temperature range. At room temperature C-V and G-V measurements are also made under illumination levels changing five folds. The diode ideality factors calculated from the dark I-V characteristics are significantly larger than unity and exhibit strong temperature dependence. The analysis of the temperature tendencies of diode ideality factor in these cells indicated that the current transport mechanism consists of both the trap-assisted tunnelling and the thermionic emission. While the temperature decreases, the barrier height calculations from I-V-T and C-V-T measurements showed that phi(B)(I-V) decreases whereas phi(B)(C-V) increases. The difference in phi(B)(I-V) and phi(B)(C-V) values and in their temperature dependence are explained by a model assuming Gaussian distribution of barrier heights. All the results are analysed after series resistance corrections. (c) 2005 Elsevier B.V. All rights reserved.en_US
dc.description.sponsorshipEMRSen_US
dc.item-language.isoengen_US
dc.publisherElsevier Science Saen_US
dc.item-rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectporous siliconen_US
dc.subjectsolar cellsen_US
dc.subjectseries resistanceen_US
dc.subjectcurrent transport mechanismsen_US
dc.titleElectrical characterization of novel Si solar cellsen_US
dc.item-typeconferenceObjecten_US
dc.contributor.departmenten_US
dc.contributor.departmentTempMugla Univ, Dept Phys, TR-48000 Mugla, Turkey; Gazi Univ, Dept Phys, TR-06500 Ankara, Turkey; Inst Phys, AZ-1143 Baku, Azerbaijanen_US
dc.identifier.doi10.1016/j.tsf.2005.12.104
dc.identifier.volume511en_US
dc.identifier.startpage258en_US
dc.identifier.endpage264en_US
dc.relation.journalThin Solid Filmsen_US
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanıen_US


Bu öğenin dosyaları:

DosyalarBoyutBiçimGöster

Bu öğe ile ilişkili dosya yok.

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster